Buy Now

App 2.50 €

Compare prices

The standard voice countDown for timer 1 and 2 will call 30 s, 20 s and then from 10 seconds down every second. For precision landings it can be a great help to have the countdown in seconds start earlier.

That is just what this little app does: it installs a second countdown on top of your existing countdown for one of your timers. You can specify the start point for the countdown, and for which timer you want the countdown.

Nice feature is that you don't need to check with your normal timer settings. It will simply skip the second call if the timer is already calling it, so no double announcements.

If you have a timer counting up instead of down, it will call the seconds after start until your set limit.

DONT USE THIS IN COMBINATION WITH THE JUSTFLY APP. THIS FUNCTION IS ALREADY IMPLEMENTED THERE. INSTALLING BOTH WILL STOP THESE SCRIPTS FROM FUNCTIONING WELL. RESTART YOUR TRANSMITTER AFTER INSTALLATION OR DELETION.

Example screen:

 

  • Line 1, selection of timer to add seconds announcements to
  • Line 2, start of countdown, or end of count up. This is automatically detected based upon the synced timer settings.
  • Line 3, shown if the settings have just been added, and a restart of the transmitter is recommended to make sure the script will function correct
  • Line 4, You can remove all adaptations to the model setup by selecting "yes". There is no further warning when selected!

have fun and

 

Just Fly! 

 

Installation

After unzipping the received installation files to your SDCard, you can install an example model to check out the App by using the "restore model" feature. Go to the Model Selection Screen (push "MENU" once), go to an empty slot, long press "ENTER", and select "restore model". Then select the model "20-AppMan.bin" if you are on OpenTX 2.0, and select the "21-AppMan.bin" if you are on OpenTX 2.1. 

Make sure you activate the AppMan model by long press ENTER again, and choose SELECT.

Press EXIT until you are at the home screen again, and long press PAGE to enter the AppManager, and select the "EngRev" App.

More info also in the HowTo's: Using Apps