Ok, let's get into managing our models. First, open up the MODEL SELECTION screen, by pressing MENU short from one of the HOME pages:
By pressing ENTER once, you have selected the model in copying mode. PLUS or MINUS will move a copy of the model to a free slot, pressing ENTER again will confirm the copy. You can cancel with EXIT.
By pressing ENTER twice will select the model in move mode, marked by a doted line around the model name. PLUS or MINUS will move the model to another slot. ENTER will confirm the move, EXIT cancel it.
Long pressing ENTER will open up a modal window, giving one extra option: Backup of the model:
Ok, let's do that. Well, we'll check the SDcard later to see where it has gone. First, go to an empty slot, and press ENTER long again:
Aha, so we can restore it. Let's do that:
Well, we only had one model backupped, so here it is shown to select for restore. After doing that, the model get's added, but is not active (star is still on model01). Since it didn't have a name, it is named according to the slot it is put in.
Ok, now you should be able to make a copy of model 1 by selecting it for copy, and putting it in slot 3:
Notice that it get's active directly. It is also given a number according to the free slot.
Well, that's all there is to it. We just need to check where the backups went. Go the the SDCARD page, and check the MODELS directory: