The functions described in this section will all be included in the Basics Model package. However, when using the BasicsOnly model as a basis, the Plus functions will not show up in the menu, because they are not supported in the underlying model setup.

Check on youtube as well.

For all the other predefined models, you will find the BasicsPlus menu option in the Basics menu:

This predefined setup comes with a different switch and throttle layout. Under the hood it is exactly the same model as all the other Basics models, so you could create it by yourself using the custom menu and the Basics model as a starting point. It is just added to support you to Have Fun and Just Fly!

The switch layout is the following:

This predefined setup comes with a different switch and throttle layout. Under the hood it is exactly the same model as all the other Basics models, so you could create it by yourself using the custom menu and the Basics model as a starting point. It is just added to support you to Have Fun and Just Fly!

The switch layout is the following:

Used to convert % to mm for deflections, and to calculated zero offset for flaperons.

Check your setup visually! Thanks to Maimi Mike, RCGroups.

Camber and Elevator presets per flightmode.

Youtube here.

Activate Flaperon for differential support.

Also for DLG. Use servo center offset for max servo travel. See youtube for setup.

Make sure you activate alarms when possible!